Lithium Rechargeable Batteries on Homemade Electric Car

Home/EV Conversion/Lithium Rechargeable Batteries on Homemade Electric Car

Lithium Rechargeable Batteries on Homemade Electric Car

Lithium Rechargeable Batteries on DIY EV?

Should you be using lithium iron phosphate batteries (LiFePO4) on your homemade electric car? Lithium rechargeable batteries are the ideal battery choice for a Do It Yourself (DIY) electric car.

Lithium batteries are perfect to be used on EV because they are light weight, durable and can generate the power output almost twice compared to a conventional lead acid battery.

However, before you start stocking up on lithium batteries for your EV conversion project, here are 3 things you should know.

Lithium rechargeable batteries require a programmed charger.

Although the lithium battery has many advantages, it does have an Achilles’ heel. This type of battery can easily be damaged by overcharging. When the LiFePO4 is overcharged, it has a tendency to bulge thus breaking its outer casing. One good example is when we overcharge the battery of our mobile phone.

Over mobile phone uses the same rechargeable lithium battery as it power unit. If we constantly overcharge our phone, you will notice a shortening of your battery life.

If you were to remove the phone battery unit and place it on a table, you will notice a slight bulge at the center. The same scenario will happen with lithium batteries on electric vehicle.

To overcome the issue of overcharging lithium batteries, we have to use a special programmed charger known as a Battery Management System (BMS). It is best to use a BMS from the manufacturer of the lithium batteries because it would have been carefully tuned and adjusted.

Requires power equalization.

In order for the BMS to work properly on your electric car, the individual battery unit on your EV has to be equalized. To perform the equalization, you will need a device known as a balancing module for each battery.

The function of the balancing module is to constantly check and record the condition of the battery from its state of charge to its internal core temperature. All the information will then be sent to a master control unit.

Lithium battery pack master control unit.

The third key component of a lithium battery pack is the master control unit. Its key function is to control the charging and discharging of individual battery.

With its centralized data processing system, the central control unit will prevent overcharge and over-discharging of the lithium rechargeable batteries on your electric car.

If you have the budget, by all means use lithium batteries on your homemade electric car. But before you do so, make sure you understand the importance of the 3 components above. Doing so will ensure your lithium battery pack to last a long time.

Homemade Electric Car Conversion Guide

Do you want to know how to convert a conventional car into a pure plug-in electric vehicle? If you do, check out the Electric Conversion Made Easy guide by Gavin Shoebridge.

Gavin is from New Zealand is a well known as the EV Guy. He has personally converted a Mitsubishi Tredia into an EV in his garage on a shoestring budget. To learn how he did it, click on the link below.

==> Click here to visit Gavin Shoebridge’s web site now!

By | 2012-08-16T09:35:25+08:00 June 28th, 2010|EV Conversion|Comments Off on Lithium Rechargeable Batteries on Homemade Electric Car

About the Author: