Unsightly scratches on your electric car paint job are unavoidable over time. Getting car paint repairs from workshop are very expensive.

Here’s a cheaper solution for you. It is the Quixx paint scratch remover kit. The Quixx paint repair system removes scratches, scraps and scuff marks quickly and reliably for all car paint finishes including your homemade electric vehicle (EV).

How do you normally get scratches on your car paint job?

Usually, we get scratches from automatic car washers, bushes, nasty finger nails and metal keys around the door handles.

Sometimes we also get scratches when we drive our car too close to objects such as posts, flower pots, trash cans etc. If you park your car too close to another vehicle, scratches can also be caused when the driver of the other car opens the door and it slams into your car. This often results in unwanted paint marks on your car finish. Bummer!

Save some money by using the Quixx paint scratch remover. The paint repair system has been certified by the German TUV industry test report showing outstanding performance.

The Quixx system is also very easy to use. To fix a scratch on your car, begin by applying the Quixx polish number 1 to the scratched area and polish it for about 1 to 2 minutes with a clean cotton cloth. Next, remove all the residues with a damp cloth or sponge.

Maintaining the paint job on your DIY electric car can be that easy. You don’t have to spend a ton of money again to fix those annoying scratches. All you’ll need now is the Quixx paint scratch remover.Now, the scratches have vanished and all it remains is a dull surface. The following step is to polish the dull surface with the Quixx finish number 2 for about 1 – 2 minutes to get the gloss back. Finally, remove any residue with a cloth.

The Quixx paint scratch remover system, is available from Amazon.com for only $14.95, to get yours today, click here!

Convert Your Own Electric Car

Want to know how to convert a conventional automobile into a plug in electric car? If you do, download the 20 DIY Electric Car Conversion Videos e-book.

The e-book will show you videos of homemade electric cars and the different components needed for the conversion project. Click on the link below to download the free e-book now!

==> Click here to download free e-book!

One clear difference between a conventional car using an internal combustion engine versus a pure electric car is the range. A normal automobile can run indefinitely as long as there are gas stations for it to fuel up.

A pure electric car has a shorter range due to its limited charge in the battery bank. As of today, there are not a lot of facilities built to cater for the charging needs of pure electric vehicles.

If you own an electric car, here are 7 tips you can use to extend its mileage on the road:

1) Install a belly pan.

A belly pan beneath the car will allow air to rush straight past instead of getting caught around the gear box, electric motor, brake lines or any other pockets below the car which will create drag. Alternatively, a piece of thick plastic can also be used to cover the entire bottom carriage of the EV.

2) Streamline the front fender.

Make the front fender of your electric car streamline or as smooth as possible. Since the EV has no radiator, it does not need air holes at the front of the car for cooling. Use fiberglass or expanding foams to fill up any unnecessary holes.

3) Cover back wheel arches.

The rear wheel arches have a tendency to create drag on the EV. It is best to cover it with a removable piece of fiberglass that fits flush to the body of the car. The challenge is to make it look sleek and yet functional.

4) Install air guides for the tires.

By installing air guides or diffusers, it will assist in pushing the air around the tire thus reducing air drag. Air guides are small fiberglass triangular block shaped aerodynamically to sit in front of the tire on the body of the car.

5) Lowering your car.

By lowering the suspension of the car, it is capable of reducing air resistance as much as 3%. However, due to the extra weight of the deep cycle battery, you can’t lower your car too much or it will affect the safety of the EV. Lowering of the car will also cause a bumpier ride. Weigh the pros and cons before your do this.

6) Install wheel covers.

Get a wheel cover that is flat of slightly convex disc with no holes to cover the entire wheel of the electric car. It is best to get covers which match the color of the body. The monolithic color will give a “space age” look to your EV.

7) Use low rolling resistance tires.

Low rolling resistance tires have a harder rubber compound. The harder rubber has lower tire rolling resistance therefore increasing the driving mileage. As a cheap alternative, you can always slightly over inflate the tires to achieve the same result.

DIY Electric Car Conversion Guide

Looking for a good guide to convert your conventional car to EV? If you are, check out Gavin Shoebridge’s Electric Conversion Made Electric e-book. The guide comes with step by step instruction with High Definition (HD) videos. Click on the link below for more information.

==> Click here to visit Electric Conversion Made Easy now!

When you are doing an electric car conversion project, there is one thing that you have to keep an eye on. It is the cost!

If you are not careful, you can blow your EV conversion budget very easily. The following are 3 factors that will affect your overall DIY electric car conversion cost.

1) Range.

When most EV owners talk about range, what they meant is the distance from a full charge to absolutely flat battery or Depth of Discharge (DOD).

Using an EV to 100% DOD is not a good idea. It will shorten the lifespan of the battery.

A typical homemade electric car has a driving range of approximately 40 miles. The actual driving miles will depend on a few factors such as the condition of the batteries, the gross weight of the car, the car aerodynamic and also your driving style.

If you want to have a long driving range on your EV, you would have to use more batteries therefore increasing your budget. The best option is to figure out your driving needs on a daily basis and then design a battery system just to fulfill that need.

2) Speed.

How fast do you want to go?

Unlike a conventional car, a high top speed for an EV can be achieved quite easily. All you need is to have enough power in the batteries and controller that will allow large amount of current to the electric motor.

However, speed does come with a cost. Higher speed equals to higher cost.

3) Labor and shipping charges.

Most of the components needed for your EV conversion would have to be shipped or delivered to your home or garage.

The components such as the electric motor, adapter plate and batteries can be quite heavy hence cost more to be delivered.

If you are staying outside of the United States, some of the parts may have to be shipped oversea to you. You have to take into account international shipping charges and import taxes.

Another cost factor is on labor. If you are planning to outsource some of the work such as electric motor support frame welding and crimping of the main power cable, be prepared to spend some money to get the work done.

EV Conversion Budget

Before you start your electric car retrofitting, it is a good idea to draw out a budget. List down all the parts, labor, transport charges and miscellaneous costing of the project.

Project budgeting is a pain, but trust me, it is more painful when you’ve over spent money that you don’t have.

Convert Your Own Electric Car

Want to know how to convert a conventional automobile into a plug in electric car? If you do, download the 20 DIY Electric Car Conversion Videos e-book.

The e-book will show you videos of homemade electric cars and the different components needed for the conversion project. Click on the link below to download the free e-book now!

==> Click here to download free e-book!

Related web pages:

1) Electric Car Conversion Plans – 5 Tips To Find Good EV Manual

2) The Best Book To Design Electric Cars